Old Leeds Tram

Railways, trams, buses, etc.
Hats Off
Posts: 273
Joined: Tue 20 Feb, 2007 3:44 pm

Post by Hats Off »

Interesting piece and some nice old photos :http://www.dailymail.co.uk/news/article ... tmlRegards.

User avatar
liits
Posts: 1153
Joined: Sun 25 Mar, 2007 11:24 am
Location: North London
Contact:

Post by liits »

Showing the tram standing outside the original Queens Arms Hotel on Harrogate Road. The building still survives.Carley’s was the business of John William Carley, Wholesale Boot & Shoe Manufacturer. The 1908 Trade Directory shows that the manufacturing premises were at Cookridge Street with shops at Woodhouse Lane, Beeston Road and Great George Street. John William himself lived at “Springhill” The Drive, Roundhay.By 1914 the factory and the Great George Street shop still the same but the other shops are listed at Victoria Arcade and Roundhay Road.     
Attachments
article-2398371-1B608DB9000005DC-435_634x498.jpg
article-2398371-1B608DB9000005DC-435_634x498.jpg (110.51 KiB) Viewed 3032 times

stutterdog
Posts: 859
Joined: Mon 15 Jun, 2009 4:46 pm

Post by stutterdog »

liits wrote: Showing the tram standing outside the original Queens Arms Hotel on Harrogate Road. The building still survives.Carley’s was the business of John William Carley, Wholesale Boot & Shoe Manufacturer. The 1908 Trade Directory shows that the manufacturing premises were at Cookridge Street with shops at Woodhouse Lane, Beeston Road and Great George Street. John William himself lived at “Springhill” The Drive, Roundhay.By 1914 the factory and the Great George Street shop still the same but the other shops are listed at Victoria Arcade and Roundhay Road.      Having read about this in the YEP online,they were saying that the car 107 is to run on the train track at Middleton. Was the tram track gauge the same as the BR railway gauge or is the Middleton gauge different to both?
ex-Armley lad

jim
Posts: 1898
Joined: Sun 17 May, 2009 10:09 am

Post by jim »

Middleton Railway track is to the same gauge as the rest of Britain's railways - 4' 8 1/2". Leeds' tram tracks were to the same nominal gauge, but like all trams, the flange profile and therefore clearances at turnouts (points) were much smaller. This means that railway vehicles will not normally run safely on tram tracks, but trams will run on railway tracks until they reach turnouts at which point they become likely to derail without special adaptations at common crossings and at check rails.    

User avatar
liits
Posts: 1153
Joined: Sun 25 Mar, 2007 11:24 am
Location: North London
Contact:

Post by liits »

Leeds tramway gauge was 4’ 8’’ ½ [while Bradford’s was 4’]. The Middleton Railway is also 4’ 8’’ ½ - standard gauge.An interesting article about the through trams from Leeds to Bradford is here....http://www.mylearning.org/inventions-in ... -2113/Edit - Jim beat me to it with a much, much better answer while I was trying to remember how to type “½”.    

stutterdog
Posts: 859
Joined: Mon 15 Jun, 2009 4:46 pm

Post by stutterdog »

liits wrote: Leeds tramway gauge was 4’ 8’’ ½ [while Bradford’s was 4’]. The Middleton Railway is also 4’ 8’’ ½ - standard gauge.An interesting article about the through trams from Leeds to Bradford is here....http://www.mylearning.org/inventions-in ... -2113/Edit - Jim beat me to it with a much, much better answer while I was trying to remember how to type “½”.     Thanks Jim and liits for your very knowledgeable answers, It's something I've always had in my head to ask and never have! Having also read the link about Bradford trams I can remember when I was a kid going to Bradford with my Aunt on 2 or 3 occasions and riding on the trams there and being really thrilled that some of them were open at each end of the upper deck! I don't think that Leeds had any similar trams and I certainly never rode on one in Leeds.
ex-Armley lad

jim
Posts: 1898
Joined: Sun 17 May, 2009 10:09 am

Post by jim »

Tramways that wanted the facility to haul 4" 8 1/2" railway wagons over their systems had to be built to 4' 7 3/4" gauge, which allowed the heavy railway flanges to run in the bottom of the tram rail grooves. Glasgows trams were built to this gauge, and I believe there were other similar systems.To use the horse tram Middleton will have to either:-1) Fit a special wheelset to railway standards to the vehicle.2) Fit some kind of filler blocks to the common crossing vees and/or fit spacers to the check rails to be passed over.3) Go VERY slowly and carefully!4) Find an otherwise unused section of track with no turnouts and trundle back and forth away from any other moving vehicle.How do you do those elegant fractions on here liits?        

User avatar
Brunel
Posts: 1182
Joined: Thu 20 Mar, 2008 12:34 pm

Post by Brunel »

Middleton Railway Festival of Transporthttp://tinyurl.com/k7v5zvo

Tyke
Posts: 164
Joined: Thu 17 Nov, 2011 10:55 am

Post by Tyke »

I live within walking distance of Middleton Railway so I asked my eldest lad if he fancied a walk down on Sunday to get a few picture, “dad even I'm not that nerdy” ..........SIGH.    
Hunslet born and bread

BIG N
Posts: 419
Joined: Thu 06 Dec, 2007 10:29 am

Post by BIG N »

Unfortunatly its first outing didn't get off to a good starthttp://www.bbc.co.uk/news/uk-england-leeds-23846756

Post Reply